![]() (If the surface is uneven, you may need to place two rubber rings at the bottom screw holes of the mounting plate.) Make sure the mounting plate is firmly attached and there should be no excess movement when you press either side. Step 3 - Attach Mounting Plate to the WallĪffix the mounting plate to the wall using screws. When installing on surfaces like wood or plaster:ĭrill holes at the marked positions using the electric drill (with a 2.8 mm drill bit). When installing on more rugged surfaces like concrete or brick:ĭrill holes at the marked positions using the electric drill ( with a 6 mm drill bit ), then use the rubber hammer to hammer the expansion bolts into the wall. Note: Installation position of the Keypad should be within 5 meters (16.4 feet) away from your lock. Stick the alignment sticker to where you'd like to install the Keypad and use a pencil to mark the positions of the screw holes. We can attach the Keypad to the wall with adhesive tape, or install it with screws. ![]() There are two ways to install the SwitchBot Keypad.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |